Analog Discovery Studio

The Analog Discovery Studio is a fully functional, portable test and measurement device that can turn any cross-functional space into a pop-up electronics laboratory. Equipped with 13 instruments, including an Oscilloscope, Logic Analyzer, Spectrum Analyzer, Waveform Generator, and more; the Analog Discovery Studio provides an entire stack of bench-top instruments with a convenient, replaceable, and bread board interface, perfect for enabling student learning anywhere.

Features:

Analog Inputs:

Used in the Oscilloscope, Network Analyzer, Spectrum Analyzer, Voltmeter, Impedance Analyzer, and Data Logger
Two analog input channels, accessible through BNC or MTE connectors
Channel type: differential (with MTE) or single-ended (with BNC)
Analog bandwidth with BNC cables: 30+ MHz @ 3dB
Analog bandwidth with MTE flywires: 9 MHz @ 3dB
Input range ±25 V (±50 V diff)
Input protected to ±50 V
14-bit resolution
Operate at 100 MS/s

Analog Outputs:

Used in the Waveform Generator and Network Analyzer
Two arbitrary waveform generator channels, accessible through BNC or MTE connectors
AC amplitude (max): ±5 V
Analog bandwidth (BNC or MTE connectors: 8 MHz @ 3dB)
Operate at 100 MS/s

Digital Inputs and Outputs:

Used in the Logic Analyzer, Pattern Generator, Protocol Analyzer, and Digital I/O
Channels: 16
Input logic standard: LVCMOS (1.8/3.3V, 5V tolerant)
Output logic standard: LVCMOS (3.3V, 12mA)

Power Supplies:

12 volt supply: 12V ±5%; 0.2 Amps max
-12 volt supply: -12V ±5%, 0.2 Amps max
5 volt supply: 5.0V ±5%; 1.0 Amps max
3.3 volt supply: 3.3V ±5%; 1.0 Amps max
V+ and V- rails: 1V to 5V (V+), and -1V to -5V (V-)
Maximum power output: 2.1W for each supply
Maximum current output: 700mA for each supply

Analog Discovery Studio

Features:

Analog Inputs:

Analog Outputs:

Digital Inputs and Outputs:

Power Supplies:

Contents:

Analog Discovery Studio:

Analog Discovery Studio Bundle: