DSP Development Tools

(Helps to Practically Learn & Understand DSP Processing in Real time)

DSP Development Tools contains wide verities of Fixed & Floating Point DSPs that follows C5000, C6000 & Keystone with single core to multi core architecture, making it ideal for low power to high end application as well as a standalone board.

Application from biomedical signal processing to Avionics can be implemented in following kits with robust on-board connectivity options.

DSP Starter Kits

The TMS320C6748 DSP Evaluation kit (EVM) is a scalable platform that breaks down development barriers for applications that require embedded analytics and real-time signal processing, including biometric analytics, communications and audio. The low-cost EVM will also speed and ease your hardware development of real-time DSP applications. This new board reduces design work with freely downloadable and duplicable board schematics and design files. A wide variety of standard interfaces for connectivity and storage enable you to easily bring audio, Image and other signals onto the board.

The EVM does not have an onboard emulator. An external emulator from TI (such as the XDS100, XDS200, XDS510, XDS560) or a third-party will be required to start development.

Features:

Processor

  • TI TMS320C6748 DSP or OMAP-L138 Application Processor
  • 456-MHz C674x Fixed/Floating Point DSP
  • 456-MHz ARM926EJ RISC CPU (OMAP-L138 only)

Memory

  • 128 MByte DDR2 SDRAM running at 150MHz
  • 128 MByte 16-bit wide NAND FLASH
  • 1 Micro SD/MMC Slot

Interfaces

  • One Fast Ethernet Port (10/100 Mbps) with status LEDs
  • One USB Host port (USB 1.1)
  • One mini-USB OTG port (USB 2.0)
  • One SATA Port (3Gbps)
  • One LCD Port (Beagleboard XM connectors)
  • Three AUDIO Ports (1 LINE IN & 1 LINE OUT & 1 MIC IN)
  • 14-pin JTAG header (No onboard emulator; external emulator is required)

What's Included..?

  • DSP Kit
  • Power Card
  • XDS 100v2 JTAG Emulator
  • USB cable
  • User Manual

Supported IDEs:

  • CCS

Other Softwares:

  • C64XPLUS-IMGLIB

DSP Application Development Kit

The TMS320C6748 fixed- and floating-point DSP is a low-power applications processor based on a C674x DSP core. This DSP provides significantly lower power than other members of the TMS320C6000 platform of DSPs.

The TMS320C6748 DSP development kit (LCDK) is a scalable platform that breaks down development barriers for applications that require embedded analytics and real-time signal processing, including biometric analytics, communications and audio. The low-cost LCDK will also speed and ease your hardware development of real-time DSP applications.

Features:

Processor

  • TI TMS320C6748 DSP or OMAP-L138 Application Processor
  • 456-MHz C674x Fixed/Floating Point DSP
  • 456-MHz ARM926EJ RISC CPU (OMAP-L138 only)

Memory

  • 128 MByte DDR2 SDRAM running at 150MHz
  • 128 MByte 16-bit wide NAND FLASH
  • 1 Micro SD/MMC Slot

Interfaces

  • One mini-USB Serial Port (on-board serial to USB)
  • One Fast Ethernet Port (10/100 Mbps) with status LEDs
  • One USB Host port (USB 1.1)
  • One mini-USB OTG port (USB 2.0)
  • One SATA Port (3Gbps)
  • One VGA Port (15 pin D-SUB)
  • One LCD Port (Beagleboard XM connectors)
  • One Composite Video Input (RCA Jack)
  • Three AUDIO Ports (1 LINE IN & 1 LINE OUT & 1 MIC IN)
  • 14-pin JTAG header (No onboard emulator; external emulator is required)

What's Included..?

  • Power Card
  • XDS 100v2 JTAG Emulator
  • USB cable & User Manual
  • Micro SD Card Loaded with Linux OS (8GB)

Supported IDEs:

  • CCS

Other Softwares:

  • C64XPLUS-IMGLIB
  • TI C6000 SDK BIOS
  • TI C6000 CGT