DSP Development Tools

(Helps to Practically Learn & Understand DSP Processing in Real time)

DSP Development Tools contains wide verities of Fixed & Floating Point DSPs that follows C5000, C6000 & Keystone with single core to multi core architecture, making it ideal for low power to high end application as well as a standalone board.

Application from biomedical signal processing to Avionics can be implemented in following kits with robust on-board connectivity options.

DSP Starter Kits

The device is a member of TI's TMS320C5000 fixed-point Digital Signal Processor (DSP) product family and is designed for low-power applications.

The C55x™ DSP architecture achieves high performance and low power through increased parallelism and total focus on power savings. The CPU supports an internal bus structure that is composed of one program bus, one 32-bit data read bus and two 16-bit data read buses, two 16-bit data write buses, and additional buses dedicated to peripheral and DMA activity.

The general-purpose input and output functions along with the 10-bit SAR ADC provide sufficient pins for status, interrupts, and bit I/O for LCD displays, keyboards, and media interfaces.

Features:

  • Small form factor DSP development tool for C5515 processor
  • TMS320C5515 fixed point low power DSP
  • Embedded XDS100 emulator
  • Flash memory
  • TLV320AIC3204 32-bit programmable low power stereo codec
  • USB and SD connectors
  • Line In, Headphone Out Connectors
  • Expansion connectors
  • Removable USB stick enclosure
  • Includes Code Composer Studio
  • Full documentation on CD-ROM

What's Included..?

  • TMS320C5515 eZdsp USB Stick
  • DVD with C5515 eZdsp Code Composer Studio™ IDE
  • USB extension cable
  • Quick Start Guide

Supported IDEs:

  • CCS

The TMS320C64 DSPs are the highest-performance fixed-point DSP generation in the TMS320C6000 DSP.

With performance of up to 5760 million instructions per second (MIPS) at a clock rate of 720 MHz, the C64x devices offer cost-effective solutions to high-performance DSP programming challenges. The C64x DSP also has application-specific hardware logic, on-chip memory, and additional on-chip peripherals similar to the other C6000 DSP platform devices.

Features:

  • The DSK features the TMS320C6416 DSP, a 1GHz device delivering up to 8000 million instructions per second (MIPS)
  • Embedded JTAG support via USB
  • High-quality 24-bit stereo codec
  • Four 3.5mm audio jacks for microphone, line in, line out, headphone out
  • 512K bytes of Flash and 16 MB SDRAM
  • Expansion port connector for plug-in modules
  • On-board standard IEEE JTAG interface
  • 5V universal power supply Software

What's Included..?

  • C6416 DSK Code Composer Studio™ IDE including the Fast Simulators and access to Analysis Toolkit on Update Advisor
  • Quick Start Guide
  • Technical Reference
  • Customer Support Guide
  • USB Cable
  • Universal Power Supply
  • AC Power Cord(s)

Supported IDEs:

  • CCS

The TMS320C67x DSPs compose the floating-point DSP generation in the TMS320C6000™ DSP platform.  The C6713 device is based on the high-performance, advanced very-long-instruction-word (VLIW) architecture developed by Texas Instruments (TI), making this DSP an excellent choice for multichannel and multifunction applications.

Operating at 300 MHz, the C6713B delivers up to 1800 million floating-point operations per second (MFLOPS), 2400 million instructions per second (MIPS), and with dual fixed-/floating-point multipliers up to 600 million multiply-accumulate operations per second (MMACS).

Features:

  • C6713 DSP Development Board with 512K Flash and 16MB SDRAM
  • Embedded JTAG support via USB
  • High-quality 24-bit stereo codec
  • Four 3.5mm audio jacks for microphone, line in, speaker and line out
  • 512K words of Flash and 16 MB SDRAM
  • Expansion port connector for plug-in modules
  • On-board standard IEEE JTAG interface
  • A complete Integrated Development Environment (IDE), an efficient optimizing C/C++ compiler assembler, linker, debugger, an a advanced editor with Code Maestro™ technology for faster code creation, data visualization, a profiler and a flexible project manager
  • DSP/BIOS™ real-time kernel

What's Included..?

  • C6713 DSK Code Composer Studio™ IDE including the Fast Simulators and access to Analysis Toolkit on Update Advisor
  • Quick Start Guide
  • Technical Reference
  • Customer Support Guide
  • USB Cable
  • Universal Power Supply
  • AC Power Cord(s)

Supported IDEs :

  • CCS

The TMS320C6748 DSP Evaluation kit (EVM) is a scalable platform that breaks down development barriers for applications that require embedded analytics and real-time signal processing, including biometric analytics, communications and audio. The low-cost EVM will also speed and ease your hardware development of real-time DSP applications. This new board reduces design work with freely downloadable and duplicable board schematics and design files. A wide variety of standard interfaces for connectivity and storage enable you to easily bring audio, Image and other signals onto the board.

The EVM does not have an onboard emulator. An external emulator from TI (such as the XDS100XDS200,XDS510XDS560) or a third-party will be required to start development.

Features:

 Processor

  • TI TMS320C6748 DSP or OMAP-L138 Application Processor
  • 456-MHz C674x Fixed/Floating Point DSP
  • 456-MHz ARM926EJ RISC CPU (OMAP-L138 only)

Memory

  • 128 MByte DDR2 SDRAM running at 150MHz
  • 128 MByte 16-bit wide NAND FLASH
  • 1 Micro SD/MMC Slot

Interfaces

  • One Fast Ethernet Port (10/100 Mbps) with status LEDs
  • One USB Host port (USB 1.1)
  • One mini-USB OTG port (USB 2.0)
  • One SATA Port (3Gbps)
  • One LCD Port (Beagleboard XM connectors)
  • Three AUDIO Ports (1 LINE IN & 1 LINE OUT & 1 MIC IN)
  • 14-pin JTAG header (No onboard emulator; external emulator is required)

What's Included..?

  • DSP Kit
  • Power Card
  • XDS 100v2 JTAG Emulator
  • USB cable
  • User Manual

Supported IDEs:

  • CCS

Other Softwares:

  • C64XPLUS-IMGLIB

DSP Application Development Kit

The TMS320C6748 fixed- and floating-point DSP is a low-power applications processor based on a C674x DSP core. This DSP provides significantly lower power than other members of the TMS320C6000 platform of DSPs.

The TMS320C6748 DSP development kit (LCDK) is a scalable platform that breaks down development barriers for applications that require embedded analytics and real-time signal processing, including biometric analytics, communications and audio. The low-cost LCDK will also speed and ease your hardware development of real-time DSP applications.

Features:

Processor

  • TI TMS320C6748 DSP or OMAP-L138 Application Processor
  • 456-MHz C674x Fixed/Floating Point DSP
  • 456-MHz ARM926EJ RISC CPU (OMAP-L138 only)

Memory

  • 128 MByte DDR2 SDRAM running at 150MHz
  • 128 MByte 16-bit wide NAND FLASH
  • 1 Micro SD/MMC Slot

Interfaces

  • One mini-USB Serial Port (on-board serial to USB)
  • One Fast Ethernet Port (10/100 Mbps) with status LEDs
  • One USB Host port (USB 1.1)
  • One mini-USB OTG port (USB 2.0)
  • One SATA Port (3Gbps)
  • One VGA Port (15 pin D-SUB)
  • One LCD Port (Beagleboard XM connectors)
  • One Composite Video Input (RCA Jack)
  • Three AUDIO Ports (1 LINE IN & 1 LINE OUT & 1 MIC IN)
  • 14-pin JTAG header (No onboard emulator; external emulator is required)

What's Included..?

  • Power Card
  • XDS 100v2 JTAG Emulator
  • USB cable & User Manual
  • Micro SD Card Loaded with Linux OS (8GB)

Supported IDEs:

  • CCS

Other Softwares:

  • C64XPLUS-IMGLIB
  • TI C6000 SDK BIOS
  • TI C6000 CGT
content required

The TMS320C6678 Multicore Fixed and Floating Point Digital Signal Processor is based on TI's KeyStone multicore architecture. Integrated with eight C66x CorePac DSPs, each core runs at 1.0 to 1.25 GHz enabling up to 10 GHz. The device supports high-performance signal processing applications such as mission critical, medical imaging, test, and automation. The C6678 platform is power efficient and easy to use. The C66x CorePac DSP is fully backward compatible with all existing C6000 family of fixed and floating point DSPs.

Features:

  • Single C6678 multicore processor
  • 512 MB DDR3
  • 128 MB NAND Flash
  • 1MB I2C EEPROM for local boot (remote boot possible)
  • 10/100/1000 Ethernet ports on board (second port on AMC connector)
  • RS232 UART
  • 60-pin JTAG emulator header
  • Onboard JTAG emulation with USB Host interface
  • Board-specific Code Composer Studio™ Integrated Development Environment
  • Multicore Software Development Kit (MCSDK) Compatible with TMDSEVMPCI adaptor card

What's Included..?

  • TMS320C6678 Multi Core Processor
  • Code Composer Studio V6.1.0
  • MCSDK
  • USB Cable & Ethernet Cable
  • 12 V Power Supply
  • Nano Universal Travel Adapter
  • Quick Start Guide

Supported IDEs:

  • CCS

Other Softwares:

  • ti_emupack_5.x.xxx.x
  • ti_emupack_keystone1_1.x.x.x
  • BIOS_mcsdk_xx_xx_xx

The 66AK2Hx platform is TI's first to combine the quad ARM Cortex-A15 MPCore processors with up to eight TMS320C66x high-performance DSPs using the KeyStone II architecture. Unlike previous ARM Cortex-A15 devices that were designed for consumer products, the 66AK2Hx platform provides up to 5.6 GHz of ARM and 11.2 GHz of DSP processing coupled with security and packet processing and Ethernet switching, all at lower power than multi-chip solutions making it optimal for embedded infrastructure applications like cloud computing, media processing, high-performance computing, transcoding, security, gaming, analytics and virtual desktop. Using TI's heterogeneous programming runtime software and tools, customers can easily develop differentiated products with 66AK2Hx SoCs.

Features:

  • Quad Cortex-A15 processors
  • Eight C66x DSP cores
  • Packet coprocessor (IPv4/IPv6) for Layer 2-4
  • Security coprocessor IPSec/SRTP
  • Five-port 1-Gb Ethernet switch
  • Cache-coherent Multicore Shared Memory Controller (MSMC)
  • 1MB per core Level 2 RAM/cache
  • 6MB shared memory with ECC and cache coherency
  • Two DDR3/3L 1600 interfaces with ECC
  • Multicore Navigator; brings single-core programming simplicity to multicore SoCs
  • TeraNet - on-chip interconnect providing more than two terabits per second throughput
  • 16,000 atomic hardware queues

What's Included..?

  • 66AK2H12 Multi Core Processor
  • Code Composer Studio V5.5.0
  • MCSDK
  • UART Cable
  • USB Cable
  • Ethernet Cable
  • 12 V Power Supply
  • Nano Universal Travel Adapter
  • Quick Start Guide

Supported IDEs:

  • CCS