Plug additional functionality into your TI LaunchPad™ kit
Application-specific BoosterPack™ plug-in modules allow you to explore a broad range of applications, including capacitive touch, wireless sensing, LED lighting control, and more...
More than 80 BoosterPack modules from both Texas Instruments and third parties
Available in 20- and 40-pin variants
Stack multiple BoosterPack modules onto a single LaunchPad kit to further enhance the functionality of your design
Check BoosterPack module compatibility for your LaunchPad kit:
Find out which BoosterPack modules are compatible with your LaunchPad kit. Simply head to the BoosterPack Checker Tool select your LaunchPad kit and BoosterPack module, and the pin-to-pin compatibility status will appear.
Capacitive Touch
Sharp ® Memory LCD
Educational BoosterPack MKII
Sensor Hub
CC31xx EMU Boost
C2K LED Booster Pack
DRV8301 Booster Pack
Digital Power Buck Converter Booster Pack
Simple Link Wi-Fi - CC3100 Booster Pack
The SimpleLink™ Wi-Fi® CC3100 wireless network processor BoosterPack™ plug-in module (with QFN-packaged device) can be used to connect to TI LaunchPad evaluation kits (software examples provided for MSP-EXP430F5529LP and MSP-EXP430FR5969).
With the Advanced Emulation BoosterPack (CC31XXEMUBOOST), CC3100BOOST can connect to a PC for MCU Emulation and software development using SimpleLink Studio for CC3100 (available in the CC3100 SDK). This kit can also be connected to other platforms through pins – use the programming guide for instructions on porting driver and sample code to any microcontroller.
The Simple Link Wi-Fi CC3100 solution provides the flexibility to add Wi-Fi to any microcontroller (MCU).
Features:
CC3100 Wi-Fi Network Processor in QFN package
Industry’s first devices to be Wi-Fi CERTIFIED™ at the chip level by the Wi-Fi Alliance™
2 20-pin stackable connectors (BoosterPack headers) to connect to TI LaunchPads and other BoosterPacks
On-board chip antenna with option for U.FL-based testing
Power from on-board LDO using USB OR 3.3V from MCU LaunchPad
2 push buttons
4 LEDs
Jumper with 0.1 Ohm resistor for current measurement
40 MHz crystal, 32 KHz crystal and oscillator
U.FL and chip antenna
USB
4 Layer PCB with 6 mm spacing and track width
What's Included..?
SimpleLink Wi-Fi CC3100 BoosterPack
Quick Start Guide
USB Cable
Supported IDEs:
CCS / ENERGIA / IAR Embedded Workbench –ARM
Other Softwares :
CC3200SDK, CCS Uniflash, TI-RTOS, Simplelink Wi-Fi Starter and More...
Note :
One CC31XX EMU Boost is needed to Flash CC3100 Booster Pack
The Capacitive Touch BoosterPack (430BOOST-SENSE1) is a plug in module for MCU LaunchPad Development Kits. This BoosterPack also includes a pre-programmed MSP430G2452IN20 Value Line device for the MSP-EXP430G2 LaunchPad. Developers can use this BoosterPack as a solution for adding capacitive touch differentiation in many applications such as consumer electronics, point of sales machines and other devices with a physical button.
Features:
Capacitive touch elements including scroll wheel, button and proximity sensor
9 on-board LEDs for instant feedback
Timer-based UART communication enables interface to PC
Open source graphical user interface (GUI) available
Includes a pre-programmed MSP430G2452IN20 with demo application
Fully supported by the MSP430 Capacitive Touch Sense Library
What's Included..?
1x 430BOOST-SENSE1 BoosterPack Plug-in Module
1x Quick Start Guide
Supported IDEs:
CCS / ENERGIA / IAR Embedded Workbench – ARM
Sharp® Memory LCD Booster Pack
The Sharp ® Memory LCD BoosterPack Plug-in Module is based on the LS013B4DN04 display from Sharp Electronics and features capacitive touch sliders. MCU LaunchPad Evaluation Kit developers can use this BoosterPack to display sensor readings, time & other information using the displays 96x96 pixels as well as to provide touch based input!
Features
Sharp LS013B4DN04 Memory LCD
1.3" inch screen offering 96 x 96 pixels
Ultra-Low-Power consumption
Provides excellent viewing angles & high contrast images or text
Display is controlled serially using SPI
2 capacitive touch sliders
DCDC 3V-to-5V converter available to also support 5V Sharp displays
Software enabled by TI’s software libraries
Graphics Library support and example available
Capacitive Touch Library support and example available
Fully open source hardware and software available for download
What's Included..?
1 x 430BOOST-SHARP96 BoosterPack Plug-in Module
1 x Quick Start Guide
Supported IDEs:
CCS / ENERGIA / IAR Embedded Workbench – ARM
Educational BoosterPack MKII:
The Educational BoosterPack MKII offers a high level of integration for developers to quickly prototype complete solutions. Various analog and digital inputs/outputs are at your disposal including an analog joystick, environmental and motion sensors, RGB LED, microphone, buzzer, color LCD display, and more.
This BoosterPack was developed with Energia in mind. Energia is an open source, community developed coding environment, which is supported by a robust framework of intuitive APIs and easy-to-use software libraries for rapid firmware development. We recommend Energia v12 or later.
Features:
TI OPT3001 Light Sensor
TI TMP006 Temperature Sensor
Servo Motor Connector
3-Axis Accelerometer
User Push Buttons
RGB Multi-color LED
Buzzer
40-pin Stackable BoosterPack Connector
Color TFT LCD Display
Microphone
2-Axis Joystick with Pushbutton
What's Included..?
1 x BOOSTXL-EDUMKII Educational BoosterPack MKII
1 x Quick Start Guide
Supported IDEs:
CCS / ENERGIA
CC110L RF Booster Pack :
The CC110L RF BoosterPack is a low-power wireless transceiver extension kit for use with the Texas Instruments MSP-EXP430G2 LaunchPad development kit. Based on the CC110L device, the on-board Anaren Integrated Radio (AIR) A110LR09A radio module with integrated antenna operates in the European 868-870MHz and US 902-928MHz ISM bands. The included software application, called AIR BoosterStack, demonstrates an example sensor network as well as network status reporting.
NB! Note that you will need two MSP430 LaunchPad kits in addition to this kit in order to use the hardware as described in the Quick Start Guide.
Features:
1.8 to 3.6 V operation
Low power consumption
SPI interface between RF module and MSP430
Prototyping area
Footprints for adding a microcontroller, pushbutton switch, and LED for standalone operation
ROHS and REACH compliant
Module is ETSI compliant and FCC/IC certified
See A110LR09x Users Manual and CC110L datasheet for radio specific features
What's Included..?
Two CC110L RF BoosterPack boards
Two MSP430G2553 devices (preloaded with a sample program)
Quick Start Guide
CD with software and documentation
Supported IDEs:
CCS / ENERGIA / IAR Embedded Workbench – ARM
Other Softwares :
AIR RF Studio
Educational BoosterPack MKII
The Educational BoosterPack MKII offers a high level of integration for developers to quickly prototype complete solutions. Various analog and digital inputs/outputs are at your disposal including an analog joystick, environmental and motion sensors, RGB LED, microphone, buzzer, color LCD display, and more.
This BoosterPack was developed with Energia in mind. Energia is an open source, community developed coding environment, which is supported by a robust framework of intuitive APIs and easy-to-use software libraries for rapid firmware development. We recommend Energia v12 or later.
Features
TI OPT3001 Light Sensor
TI TMP006 Temperature Sensor
Servo Motor Connector
3-Axis Accelerometer
User Push Buttons
RGB Multi-color LED
Buzzer
40-pin Stackable BoosterPack Connector
Color TFT LCD Display
Microphone
2-Axis Joystick with Pushbutton
What's Included..?
1x BOOSTXL-EDUMKII Educational BoosterPack MKII
1x Quick Start Guide
Supported IDEs:
CCS / ENERGIA
Sensor Hub Booster Pack
The Texas Instruments Sensor Hub BoosterPack (BOOSTXL-SENSHUB) is an add-on board designed to fit the Tiva™ C Series TM4C123G LaunchPad along with all of TI’s MCU LaunchPads. The Sensor Hub BoosterPack is a Tiva platform for evaluating the use of ARM® Cortex™-M4-based TM4C devices in sensor fusion applications, demonstrating the mathematical and algorithm computation features of the M4 architecture.
Features:
Seven on-board sensor functions, including:
InvenSense MPU-9150: 9-axis MEMS motion tracking
3-axis gyro
3-axis accelerometer
3-axis compass
Bosch Sensortec BMP180 pressure sensor
Sensirion SHT21 humidity and ambient temperature sensor
Intersil ISL29023 ambient and infrared light sensor
TI's TMP006 non-contact infrared temperature sensor
What's Included..?
BOOSTXL-SENSHUB-Sensor Hub BoosterPack
Supported IDEs:
CCS / ENERGIA / IAR Embedded Workbench – ARM / Keil / Mentor Embedded
DRV8301 Booster Pack
The BOOSTXL-DRV8301 is 10A, 3-phase brushless DC drive stage based on the DRV8301 pre-driver and CSD18533Q5A NextFET™ power MOSFET. The module has 3x low side current sense amps (2 internal to DRV8301, 1 external). The module also has a 1.5A step down buck converter, is fully protected with short circuit, thermal, and shoot-through protection, and is easily configured via a SPI interface. This boosterpack is ideal for those wishing to learn about sensorless brushless control techniques and drive stage design. This kit was designed to work with any LaunchPad XL, with primary software support through the http://www.ti.com/tool/LAUNCHXL-F28027F using MotorWare to support the InstaSPIN™-FOC sensorless control solution.
Features:
6 to 24V supply input
Supports up to 14A peak, 10A continuous current output
Supports voltage and current feedback for InstaSPIN-FOC sensorless control solution
Complete brushless DC drive stage in ultra small form factor (2.2” x 2.3”)
3x low side current sense amps, 6x Power FETs (< 6.5mΩ) & 1.5A step down buck converter
Drive stage is fully protected including short circuit, thermal, shoot-through, and under voltage protection.
What's Included..?
3-Phase Brushless DC Drive Stage BoosterPack
Supported IDEs:
CCS / ENERGIA
C2000 LED Booster Pack:
The C2000 LED BoosterPack demonstrates the control of 3 boost converters to drive 3 LED (Red, Green, and Blue) strings. A variety of user interface options are provided included capacitive touch control using an MSP430 and the MSP430 Cap Touch BoosterPack (430BOOST-SENSE1) as well as a PC GUI application. This boosterpack is ideal for those wishing to learn about real time digital control techniques and LED lighting. This kit requires a C2000 LaunchPad to function as intended.
The LED Lighting project allows C2000 LaunchPad users to plug their LaunchPad into the LED Lighting BoosterPack and accurately control a series of LED strings
Features:
3 Booster Converters
8 RGB LEDs
MSP430 Capacitive Touch Interface
What's Included..?
LED BoosterPack
Power Supply
Quick Start Guide
Supported IDEs:
CCS / ENERGIA
Digital Power Buck Converter Booster Pack
The Digital Power Buck Converter BoosterPack provides an introductory platform for learning the basics of digital power control. When paired with the C2000™ Piccolo™ F28069M LaunchPad, this BoosterPack enables a full buck converter control system controlled by the C2000™ TMS320F28069 microcontroller. The buck converter power stage supports dynamic loads and converts an external 9V power supply to a configurable output voltage. The Digital Power Buck Converter BoosterPack is supported by the C2000 Microcontroller family’s Digital Power software called powerSUITE. powerSUITE is a breakthrough set of tools that simplify design and help maximize performance of digital power supplies. All of the design files and relevant code examples for the Digital Power Buck Converter BoosterPack are included for free in the C2000 MCU family’s controlSUITE™ software suite.
Features:
Single buck converter power stage using voltage mode control
9V input voltage; 2A input current
Variable output voltage (default 2V)
Software-controlled dynamic load
Compatible with the F28069M LaunchPad
Free unrestricted version of Code Composer Studio integrated development environment (IDE)
Code examples and design files are included in controlSUITE
Supported by powerSUITE Digital Power Supply Design Software Tools for C2000TM MCUs
What's Included..?
Digital Power Buck Converter BoosterPack PCB
Quick Start Guide NOTE: External 9V,2A power supply and F28069M LaunchPad required
